WII CHIPPING FROM £50 -- IPHONE ALL MODELS SCREEN REPAIRS FROM £45 -- PLAYSTATION 3 YLOD REPAIR (YELLOW LIGHT OF DEATH) £50 -- XBOX 360 RLOD (RED LIGHTS OF DEATH) £40 -- NINTENDO DS/DSI SCREEN REPAIRS FROM £40 -- MOBILE PHONE REPAIRS -- PC AND LAPTOP REPAIRS -- IPOD REPAIRS

GHD REPAIRS

MOST REPAIRS CARRIED OUT FOR £30
 
Ghd power cable problem 

I
f
your ghd is turning on and off depending upon which position your cable is in then this needs replacing. You may also hear a crackling or buzzing noise when you turn them on at the mains. This is a short happening inside the ghds and may sometimes even give off a small amount of smoke or a burning smell. If you ghd cable isn't functioning as it should we strongly recommend that you stop using them immediately and get a repair. Continuing to use faulty ghds is dangerous. 
Another problem that is linked to the power cable problem is the ghd power cable connector inside. This can also show similar problems of intermittent power when the cableenters the straighteners. 
When we repair ghds with these symptoms we always check both the cable and the connector and often replace both parts to ensure future reliability and safety. 

Power cable problems are not always visible to the eye. If yours has cuts in the wire and obvious damage then it may be no surprise that you are having a problem with your ghd power cable. However sometimes the cable looks fine but may be damaged inside due to the ghd power cable being the part that gets so much wear and tear over the years. 

 
  Ghds dead and won't turn on

 They can be fixed. This can be caused by a number of things. If you send them for us to repair we will fully test every component for safe and reliable use in the future and replace the components that have failed. Sometimes if the ghds are dead there may be more than one part to replace, this isn't a problem and we will never charge extra for it. 

The loss of power may be a complete failure of the power cable and its internal connector. This may have shown problems for a while and finally given up. Please see our power cable problems page for more information. 

No power to your ghds could also mean the thermal fuse has blown inside. This is designed to blow when ghds overheat. They can blow prematurely for no reason other than prolonged use. However it could have blown due to a component failure or a fault with thecircuit board that requires a full circuit board replacement. In all cases we will replace all parts required. 

If your ghds wont turn on it may also be a fault with a heater element. If one of these fail it stops the ghds from powering up. 
 
  Ghds aren't heating up properly


Heater elements can sometimes crack or more commonly the wires get damaged due to age. In either situation we will replace the heater elements that are faulty and check all other components, within you ghds, to ensure safe and reliable use in the future. 
Sometimes heater elements fail without warming but sometimes it can be a gradual thing. You may notice a loss of power when you put the two plates together if an element's connecting wire is failing. 
 
  Loose plates / broken arms

This can be a problem after dropping ghds or from people standing on them. It looks bad but often isn't a problem to get repaired.  If your ghd plastic arms break we strongly advise to stop using them immediately. 
If they have stopped working after they have been damaged, don't worry we will check everything and replace all required parts to get them back up and running for safe and reliable future use
 

Copyright© 2010, Nesstronic All rights reserved   ●   terms & conditions   ●   privacy   ●   sitemap   ●   contact us
   UK Computer Repair